Week 6 (Oct. 3, 2018): Coordination with the Small-Scale Bogie and Track Team

-
Today, we discussed overlapping aspects of the small-scale system with the bogie team and the tracks team.

The track team has settled on a design for the new track: a rectangular shape track with a Y-junction junction in the center to accommodate two charging stations, one at each branch. We are hoping to implement induction charging at these stations, which requires a 3.7 V Li-ion battery. Something else to consider is if we can use a transistor to amplify the current draw from the induction charger to speed up charging of the Li-ion battery and if we can use a boost converter (step-up transformer) for the brushless motor we will use.

With the bogie team, we discussed motor sizing, as this selecting the appropriate motor would affect the force that the wheels would experience, and thus the design of the bogie. The force of the motor would be found by: (1) determining the power supply current output to the motor, I; (2) converting the speed constant, KV, which is provided in the motor specifications, into torque constant, KT; (3) multiplying the current and the torque constant, KT, to yield Torque, T; (4) Solve for Force by dividing Torque by radius and the sine of the angle between radius and Force.


This force of the wheels would then be put into an FBD, along with the weight of the pod car and friction force. Finally, the coefficient of friction would be found.

Comments

  1. Eric HagstromOctober 8, 2018 at 3:54 PM

    Excellent post by the Small Scale Controls Team! Please begin adding links to your code (include detailed comments on how the code works) and other hardware (sensors / actuators, etc) that you are using for your controls system. In addition, please create detailed wiring diagrams when the time comes to breadboarding or creating PCBs.

    ReplyDelete
  2. Eric HagstromOctober 15, 2018 at 9:58 AM

    The Small Scale Controls Team has missed their last blog post. Hopefully your team will keep up with this blog. Points will be reduced.

    ReplyDelete
  3. Eric HagstromOctober 15, 2018 at 10:07 AM

    Per the schedule (posted by me on the main SpartanSuperway.blogspot.com), your team should be well underway of designing your controls system. This week, I would like to see your progress on how far your team is.

    What is the progress on your code? Wiring schematics? Induction Charging calculations?

    ReplyDelete

Post a Comment

Popular posts from this blog

Week 10 (Oct. 31, 2018): Battery Selection

-
Image
 UPDATE: Calculations for the induction charging and battery are found in the Week 14 and Week 15 blog posts. After finishing the last of the Presentation #2’s, time was provided to continue working on our projects. The first subject we wanted to address was to finalize the selection of our battery. So, we listed the pros and cons of the three main battery types: LiPo (Lithium-Polymer), NiMH (Nickel-Metal-Hydride), and Li-ion (Lithium-ion).   Sources: Roger’s Hobby Center | A Guide to Understanding LiPo Batteries and NiMH Vs LiPo Batteries - Which is better? and All About Batteries We eventually decided that we will be using LiPo batteries, like last year’s team, since they are more efficient and have a high energy density, along with their other benefits that outweigh their disadvantages and dominate the other battery types. Also, the fact that mini-LiPo chargers exist, such as the one below from Adafruit, will make charging more robust due to its compact design.
Read more

Week 4 (Sept. 19, 2018): Revised Project Objectives & Proposals

-
Today, Colin, a member of last year’s Small-Scale Controls Team and possibly our mentor/contact/guide, visited the Spartan Superway Design Center to provide us with advice, problems his team faced, features that they were hoping to implement but never got around to, and feedback on the design ideas we proposed.   Addressing our first idea of installing a differential drive system that would drive the wheels that move along the outer rail faster than the inner wheels when making a turn, preventing over-exertion of the servo motor steering the wheels when making a turn , Colin stated that we have two options: (1) Use two servo motors and incorporate the drive differential. However, Colin warned that he and his team used up all of their extra servo motors (about six extra) during their exhibition at Make’s Faire. So, he suggested buying three servos for each day spent at the Faire (three servos x three days = nine servos). If we want to pursue this idea, he suggested looking int
Read more